Basic Options

SDKs are configurable using a variety of options. The options are largely standardized among SDKs, but there are some differences to better accommodate platform peculiarities. Options are set when the SDK is first initialized.

Options are configured in your .env and config/sentry.php config files:

SENTRY_TRACES_SAMPLE_RATE=1.0

Common Options

The list of common options across SDKs. These work more or less the same in all SDKs, but some subtle differences will exist to better support the platform. Options that can be read from an environment variable (SENTRY_DSN, SENTRY_ENVIRONMENT, SENTRY_RELEASE) are read automatically.

dsn

The DSN tells the SDK where to send the events. If this value is not provided, the SDK will try to read it from the SENTRY_DSN environment variable. If that variable also does not exist, the SDK will just not send any events.

In runtimes without a process environment (such as the browser) that fallback does not apply.

Learn more about DSN utilization.

logger

If enabled, the SDK prints out debug information about if something went wrong while sending events. It isn't recommended to use this in production.

// This logs messages to the provided file path
'logger' => new \Sentry\Logger\DebugFileLogger(filePath: storage_path('logs/sentry.log')),

// This logs messages to stdout
'logger' => new \Sentry\Logger\DebugStdOutLogger(),

release

Sets the release. Some SDKs will try to automatically configure a release out of the box but it's a better idea to manually set it to guarantee that the release is in sync with your deploy integrations or source map uploads. Release names are strings, but some formats are detected by Sentry and might be rendered differently. Learn more about how to send release data so Sentry can tell you about regressions between releases and identify the potential source in the releases documentation or the sandbox.

By default the SDK will try to read this value from the SENTRY_RELEASE environment variable (in the browser SDK, this will be read off of the window.SENTRY_RELEASE.id if available).

environment

Sets the environment. This string is freeform and set to production by default. A release can be associated with more than one environment to separate them in the UI (think staging vs production or similar).

By default the SDK will try to read this value from the SENTRY_ENVIRONMENT environment variable.

error_types

Sets which errors are reported. It takes the same values as PHP's error_reporting configuration parameter.

By default all types of errors are be reported (equivalent to E_ALL).

sample_rate

Configures the sample rate for error events, in the range of 0.0 to 1.0. The default is 1.0 which means that 100% of error events are sent. If set to 0.1 only 10% of error events will be sent. Events are picked randomly.

max_breadcrumbs

This variable controls the total amount of breadcrumbs that should be captured. This defaults to 100, but you can set this to any number. However, you should be aware that Sentry has a maximum payload size and any events exceeding that payload size will be dropped.

attach_stacktrace

When enabled, stack traces are automatically attached to all messages logged. Stack traces are always attached to exceptions; however, when this option is set, stack traces are also sent with messages. This option, for instance, means that stack traces appear next to all log messages.

This option is turned off by default.

Grouping in Sentry is different for events with stack traces and without. As a result, you will get new groups as you enable or disable this flag for certain events.

send_default_pii

If this flag is enabled, certain personally identifiable information (PII) is added by active integrations. By default, no such data is sent.

This option is turned off by default.

If you enable this option, be sure to manually remove what you don't want to send using our features for managing Sensitive Data.

server_name

This option can be used to supply a "server name." When provided, the name of the server is sent along and persisted in the event. For many integrations, the server name actually corresponds to the device hostname, even in situations where the machine is not actually a server.

Most SDKs will attempt to auto-discover this value.

ignore_exceptions

A list of class names that matches exceptions that shouldn't be sent to Sentry. Checks whether the provided class name is of a given type or subtype.

ignore_transactions

A list of strings that match transaction names that shouldn't be sent to Sentry.

in_app_include

A list of string prefixes of module names that belong to the app. This option takes precedence over in-app-exclude.

Sentry differentiates stack frames that are directly related to your application ("in application") from stack frames that come from other packages such as the standard library, frameworks, or other dependencies. The application package is automatically marked as inApp. The difference is visible in sentry.io, where only the "in application" frames are displayed by default.

in_app_exclude

A list of string prefixes of module names that do not belong to the app, but rather to third-party packages. Modules considered not part of the app will be hidden from stack traces by default.

This option can be overridden using in_app_include.

max_request_body_size

This parameter controls whether integrations should capture HTTP request bodies. It can be set to one of the following values:

• never: Request bodies are never sent.
• small: Only small request bodies will be captured. The cutoff for small depends on the SDK (typically 4KB).
• medium: Medium and small requests will be captured (typically 10KB).
• always: The SDK will always capture the request body as long as Sentry can make sense of it.

max_value_length

The number of characters after which the values containing text in the event payload will be truncated (defaults to 1024).

context_lines

The number of context lines for each frame in the stack trace when loading a file.

Hooks

These options can be used to hook the SDK in various ways to customize the reporting of events.

before_send

This function is called with an SDK-specific message or error event object, and can return a modified event object, or null to skip reporting the event. This can be used, for instance, for manual PII stripping before sending.

By the time before_send is executed, all scope data has already been applied to the event. Further modification of the scope won't have any effect.

before_send_transaction

This function is called with an SDK-specific transaction event object, and can return a modified transaction event object, or null to skip reporting the event. One way this might be used is for manual PII stripping before sending.

before_breadcrumb

This function is called with an SDK-specific breadcrumb object before the breadcrumb is added to the scope. When nothing is returned from the function, the breadcrumb is dropped. To pass the breadcrumb through, return the first argument, which contains the breadcrumb object. The callback typically gets a second argument (called a "hint") which contains the original object from which the breadcrumb was created to further customize what the breadcrumb should look like.

Transport Options

Transports are used to send events to Sentry. Transports can be customized to some degree to better support highly specific deployments.

transport

Switches out the transport used to send events. How this works depends on the SDK. It can, for instance, be used to capture events for unit-testing or to send it through some more complex setup that requires proxy authentication.

http_proxy

When set, a proxy can be configured that should be used for outbound requests. This is also used for HTTPS requests unless a separate https-proxy is configured. However, not all SDKs support a separate HTTPS proxy. SDKs will attempt to default to the system-wide configured proxy, if possible. For instance, on Unix systems, the http_proxy environment variable will be picked up.

send_attempts

Deprecated. Controls how many times the SDK will attempt to resend an event to Sentry. The default is 0.

http_connect_timeout

The maximum number of seconds to wait while trying to connect to a server. The default is 2.

http_timeout

The maximum execution time, in seconds, for the request+response as a whole. The value should also include the time for the connect phase, so it should be greater than the value set for the http_connect_timeout option. The default is 5.

Tracing Options

enable_tracing

A boolean value, if true, transactions and trace data will be generated and captured. This will set the traces-sample-rate to the recommended default of 1.0 if traces-sample-rate is not defined. Note that traces-sample-rate and traces-sampler take precedence over this option.

traces_sample_rate

A number between 0 and 1, controlling the percentage chance a given transaction will be sent to Sentry. (0 represents 0% while 1 represents 100%.) Applies equally to all transactions created in the app. Either this or traces_sampler must be defined to enable tracing.

traces_sampler

A function responsible for determining the percentage chance a given transaction will be sent to Sentry. It will automatically be passed information about the transaction and the context in which it's being created, and must return a number between 0 (0% chance of being sent) and 1 (100% chance of being sent). Can also be used for filtering transactions, by returning 0 for those that are unwanted. Either this or traces_sample_rate must be defined to enable tracing.